11
Controller
Backplate
4 Pressure-
Sensitive Pads
On the Backside
Of Backplate
2 Side
Cut-outs
Installation and Wiring Instructions for Corbin Russwin WM800
2.4 Performing a Glass Mount Installation
Figure 4 shows the four pressure-sensitive adhesive pads and the two side cut-outs used
for this installation. In this
configuration, the WM800 unit is affixed with the four self-
adhesive pads to the glass or the glass window adjacent to the controlled door being
accessed, on the interior side of the glass. One of
the two side cut-outs is used to bring the
wires out of the side of the WM800 case.
1. Disconnect the back housing from the front keypad/controller. Remove the tape from
the four self-adhesive pads on the b
ack housing and apply the pads to the four
corners of the backplate.
2. Affix the back housing to the glass door or the glass window adjacent to the
controlled door being accessed on the interior side of the glass.
3. Determine which of the two side cut-outs
on the back housing to use for the wiring
and open that cut-out usi
ng the appropriate cutting tool.
4. Pull the wiring through the select
ed side cut-out as required.
5. Install the communication board onto the controller backplate using the five screws
provided.
6. Refer to Wiring Instructions (section 3), connect the communication board to the main
controller board and appropriate wiring for the application.
7. Connect the front keypad/controller to the back housing.
8. Install either the hex screw using the supplied hex wrench or the spanner screw
supplied in the hardware pack. Use a #6 spanner bit (not included) for the spanner
screw.
Figure 4 Performing a Glass Mount Installation
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
