17
Installation and Wiring Instructions for Corbin Russwin WM800
3.3 Communication Board Wiring Connections Overview
Figure 11 below illustrates the pin connections on the WM800 communication board.
Figure 11 Identifying Pin Connectors
(communication board)
P1
P2
JP1
3 2 1
To Main Control
Board connector P 5
1 – White (+12 – 15 VDC)
2 – White (RX)
3 – White (TX)
4 – White (GND)
Keypad Power (Output)
and data wires
1 – Red (+ 12 or 24 VDC)
Black (GND)
System Power ( input)
Infrared
Output
Five screw holes for
Mounting to backplate
Note: JP1 is a factory
set for 24VDC operation
Voltage Section Jumper
JP1: Place jumper on
pins 1 & 2 for 12VDC
and pins 2 & 3 for 24VDC
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
Branding Guidelines For Installation Instruction Sheets
Endorsed Logo
* Must Be Used On All Single Page and Multiple Page Installation Instruction Sheets
Group Brand Tagline
* Must Be Used On The Bottom Left Of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom Left Of
ALL INSIDE
PAGES
of Multiple Page Installation Instruction Sheets
* It is
NOT USED
On The Back Page Or Back Cover Of Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
Corporate Statement
* Must Be Used On The
BACK PAGE
Or
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Image Must Be Used - CANNOT Be Typed
* A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available
Copyright Statement
* Must Be Used On The Bottom of
ALL ONE PAGE
Installation Instruction Sheets
* Must Be Used On The Bottom of The
BACK PAGE
OR
BACK COVER
Of All Multiple Page Installation Instruction Sheets
* Copy Can Be Typed
Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.
Note: Marketing will continue to be part of the instruction sheet and template reviewing process
mlw - 07/25/08
