6
c
b
a
IMPORTANT:
It is advised that
this stage is carried out by two people to avoid damaging the runners, rails or door.
From inside the enclosure, push fit the 'runners' fitted to the top and bottom of the door, onto the 'door rollers' pre-fitted in the
top and bottom rails.
12
From inside
Top of door
Bottom of door
The 'cam adjusters' at the top and bottom of the door may need adjusting so that the door slides freely and the magnetic seal is
flush against the magnetic profile when the door is closed.
a:
Loosen all 4 cam adjuster screws (1 turn maximum).
b:
Turn the cam adjusters (by hand or using a 16mm spanner) until the
door hangs vertically. Re-tighten the screws -
do not over tighten
.
c:
Push fit all 4 covers (PN50103) onto the door.
13
From inside
PN50103
