10
Coral UV Sanitizer and Dryer
Maintenance
There are three main tasks to maintain your product to produce optimal drying and sanitizing results.
All procedures take just a few minutes and should be performed according to the schedule outlined
below.
Frequency
Clean the Product
It is recommended to use gloves when handling any of the components inside the chamber.
Fingerprints can affect the reflection of the UV light and can hinder the sanitization process.
Follow these steps to clean the Coral UV Sanitizer and Dryer.
1.
Unplug the product.
2.
Press the button on the front of the product and remove the basket.
3.
Using a damp cloth, wipe the inside and walls of the chamber to remove any
watermarks
or fingerprints.
4.
Wipe with a dry cloth to ensure no marks are left behind on the stainless steel, as they can
negatively affect sanitization.
5.
Wipe the basket in the same manner as the chamber.
6
.
Reinsert the basket in the chamber, ensuring not to touch the inside walls or floor of the chamber.
ATTENTION:
Do NOT use chemicals, cleaners, vinegar, or any other cleaning solutions on the product.
Clean the interior of the product for watermarks and stains
After every use
Replace the HEPA filter
Every 3 months (depending on use)
Replace the UV bulb
Every 12 months (depending on use)
IMPORTANT
Do NOT wipe the protective
grate
with water, as this could allow water to enter the UV light
chamber.
IMPORTANT
Always wipe off the dry water spots after each use on the interior space. Dry water spots can hinder the
performance of the UV lights and cause damage to the stainless steel interior.
