14
Coral UV Sanitizer and Dryer
12.
Wipe the face of the protective cover with a dry cloth (or damp cloth if there are stubborn
watermarks). Ensure the protective cover is dry when it is reinserted.
13.
Align the protective cover with the lid and gently push it into place, ensuring not to touch the
bulbs.
If a UV Bulb Breaks
In the event a bulb or lamp should break:
1.
If the Coral UV Sanitizer and Dryer is on, turn it off and unplug immediately.
2.
Move all pets and children away from the broken bulb.
3.
If applicable, turn off central forced air heating/cooling system.
4.
Open a window or door outside to air out the room for 5-10 minutes.
5.
Use gloves and a wet paper towel to remove smaller pieces of broken glass and mercury residue.
You can also use stiff cardboard or similar to scoop up the larger broken pieces.
6.
DO NOT USE A VACUUM TO REMOVE THE BROKEN GLASS.
7.
Repeat wiping area with clean wet paper towels until clean.
8.
Place all items used to clean in a sealable container.
9.
Dispose of all waste according to your local requirements.
For further information regarding UV bulb safety, please visit
https://www.epa.gov/cfl/cleaning-
.
IMPORTANT
Do NOT grasp the middle of the bulb when you install it.
WARNING:
This product can expose you to chemicals including mercury, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. All fluorescent bulbs, including
germicidal UV bulbs, contain a small amount of mercury sealed within the glass tubing. For more
information, go to
www.P65Warnings.ca.gov
. To minimize exposure to mercury vapor, EPA recommends that
you follow the instructions below to prevent or handle broken bulbs.
