Copystar 250ci, Operation Manual, Page: 32 / 208

FAX Operation (Basic)
3-4 OPERATION GUIDE
Automatic Send
General transmission using the numeric keys is explained.
Switching to the Send Screen
1
Check that the basic send screen is displayed.
If the basic send screen is not displayed, press the
Send/FAX key.
The screen for sending appears.
NOTE:
Depending on the settings, the address book
screen may appear. In this event, press [Cancel] to
display the basic screen for sending.
Selection of Transmission Method
2
There are two transmission methods - memory
transmission and direct transmission. The default is
memory transmission.
To select direct transmission, use the following
procedure.
1 Press [Advanced Setup], and then [FAX Direct
Transmission].
2 Press [On].
3 Press [OK].
Status 10/10/2008 10:10
Original/Sending
Data Format
Quick Setup Destination Color/
Image Quality
Advanced
Setup
Destination Detail
A OFFICE 1234567890
Address
Book
Folder Path
Entry
E-mail
Addr Entry
No.
1/100
AAA BBB CCC DDD EEE
FFF GGG HHH III JJJ
0004 0003 0005 0001 0002
0006 0007 0008 0009 0010
1/1
i-FAX
Addr Entry
FAX No.
Entry
WSD Scan
Place original.
Ready to send.
Destination
B OFFICE 1234568907
C OFFICE 1234569078
Direct Delete Recall On Hook Chain Detail/Edit
Setting for Direct
transmission
Description
Off Starts memory transmission.
After originals are scanned into memory, the communication starts.
On Starts direct transmission.
Dials the receiving system, and after the communication has
started, originals are scanned.