27
under pan
Picture 2
4.7.1 Cover installation:
1
）
Take out 4 M3×5 crossed stainless steel screws and 4 3.2×8×0.7 four fluorine washers and housing
from accessories.
2
）
Fix the housings at the hoist pole in frame at two sides with 4 M3×5 crossed stainless steel screws
and 4 3.2×8×0.7 four fluorine washers
（
one screw corresponds one washer
）（
see picture 3
）
M3 x 5 crossed stainless steel screw ,
four fluorine washer
Picture 3
4.7.2 Vehicle-carried installation
1
）
Take out the Vehicle absorber, take the underpan as templet, drill four installation holes on the
bracket which needs be installed. (see picture 4)..
2
）
Prepare 4 the right length bolts according to your request, fix the absorber with flat pillow and flip pillow,
see picture 5;
