17
speed by PAN LEFT/PAN RIGHT and press OPEN button to exit the menu. The start position and
the end position of the pan can be set up by options 1 and 2 of the menu.
¾
SET PATROL
：
To run patrol of multiple positions. Select the number of the pattern by PAN
LEFT/PAN RIGHT and press OPEN button to exit the menu.
¾
RUN PATROL
：
To run patrol of multiple positions. Select the number of the pattern by PAN
LEFT/PAN RIGHT and press OPEN button to exit the menu.
¾
RECORD PATTERN
：
To edit self-study of patrol. It can remember PTZ operation in 40 seconds in
maximum. When the 40th second is up or press CLOSE button, the edit is terminated.
¾
RUN PATTERN
：
To run self-study pattern. After running it shall exit the menu. Control the joystick
to terminate its running.
¾
RETURN
：
To return to the main menu.
2.3 Appendix to the Menu
2.3.1 Operation of Multiple Patrol Positions under Edit State.
After entering into Edit state, operations
on the screen are as follows:
The prompt messages are displayed on both op and bottom lines and information of every pattern is
displayed in the middle of the screen. One line includes data of two patrol positions.
Move the cursor by
PAN LEFT/RIGHT and change values by TILT UP/DOWN. Press down buttons for more than one
second to speed up operation. Press CLOSE button to exit the Edit state and store the revisions. The program
can search the first position where POS is “---”, and store data in front of it and regard data after it ineffective.
Look the above drawing for example, the program stores first four patrol positions. The settable range of
NO – No.of Patrol Position
POS – No.of Preset Position
SP – Leaving Speed
TM – Dwell Time
SEQ:01 – It means current set sequence is 1
CLOSE:EXIT – Press CLOSE to exit Edit state
After entering into Edit state,following in- formation
displays on the screen:
EDITAREA:onelineincludesdataoftwopatrolpositions
