COP-USA ash56nvir, Operation Manual

Page: 16 / 36

16
return home. The time can be from 1 to 99 minutes.
¾ RETURN
：
To return the menu one level upward.
2.2.6 CAMERA MASK SET
¾ MASK PRIVACY
：
ON-open/OFF-close.
¾ MASK SHADE
：
Set the mask area color: BLACK/GRAY/WHITE
。
¾ MASK REGION
：
Edit the mask area.
¾ RETURN
：
To return to the main menu.
2.2.7 PROGRAM
¾
AUTO PAN START POS
：
to set the start position of the pan
between two positions. After entering you can move the dome camera
by the joystick. Push CLOSE button you can store current position and
return.
‹ RETURN
：
To return to the main menu.
¾ AUTO PAN END POS
：
to set the end position of the patrol between two
positions. After entering you can move the pan/tilt by the joystick. Push CLOSE
button you can store current position and return.
¾ RUN AUTO PAN
：
to pan between two positions. Please set the start position and the end position of
the pan first. If the start position is just the end position, the dome camera shall make 360 ° pans. The
speed of the pan is divided into six grades: FAST / NORMAL / SLOW / -FAST / -NORMAL /
-SLOW. The first three grades are the pan less than 180° while the rear three grades are the pan larger
than 180°. Adjust speed by PAN LEFT/PAN RIGHT and press OPEN button to exit the menu. The
start position and the end position of the pan can be set up by options 1 and 2 of the menu.
¾
SET TITLE
：
to pan between two positions. Please set the start position and the end position of the pan
first. If the start position is just the end position, the dome camera shall make 360° pan. The speed of the
pan is divided into six grades: FAST / NORMAL / SLOW / -FAST / -NORMAL / -SLOW. The first
three grades are the pan less than 180° while the rear three grades are the pan larger than 180°. Adjust
CAMERA MASK SET
1. MASK PRIUACY ON
2. MASK SHADE BLACK
3. MASK REGION 01
4. RETURN
PROGRAM
1. AUTO PAN START POS
2. AUTO PAN END POS
3. RUN AUTO PAN SLOW
4. SET TI TLE 01
5. SET PATROL 01
6. RUN PATROL
7. RECORD PATTERN 7
8. RUN PATTERN
9. RETURN