23
The fourth chapter
Installation of the Product
4.1
ｓａｆｅ
ｍｅａｓｕｒｅ
4.1.1 Competency requirement to install or maintain
¾
Take on the qualification on CCTV installation or maintain, and qualification of relative work(such as
high air work and so on),must have the rudimentary know ledge and operation skill as follows;
¾
Have rudimentary knowledge and operations skill on CCTV systems and makeup parts;
¾
Have rudimentary knowledge and operation skill on low pressure routing and electric line
connection.
¾
Have capacity of knowing the manual
4.12 Requirements on rise and fall device
Use safe rise and fall device which fits for installing place and PTZ installing way.
Rise and fall device can reach the enough height
Rise and fall device should has safety capability.
4.2 Warning
1. Please read the manual operation carefully before installing.
2.
There are two input ways of power supply: DC12V (vehicle) and AC24V (normal pan/tilt). Detailed
connections refer to the description files.
3.
There are sophisticated optical and electronic components inside the product. Avoid incorrect
operation methods such as heavy pressing or strong vibration during the course of transportation, store
and installation otherwise the product could be damaged.
4.
Please do not dismount components inside the product to avoid occurrence of trouble. There is no part
inside the product, which needs repair by customer himself.
5.
Observe all electric safety standards in application and adopt special power supply attached the product.
RS-485 control signal and video signal should be kept enough distance with the high voltage devices
and cables during the course of transmission, and take protection measures such as anti-lightning and
surging etc. if necessary.
6.
Do not apply the product under the state exceeding limited temperature, humidity or specifications of
power supply.
7.
Do not aim the camera at the sun or very bright object, aim or monitor bright and still object for a long
time whether the power supply of the camera is switched on or off.
8.
Clean out dirt with special lens tissue if dust is stuck on the lens.
4.3 Environment request
