High Speed Dome Camera Introduction Manual
6
z
Group
The preset position can be programmed to be recalled in a set of sequences. This sequence can be
set to let the camera scan from one position to the next in a cycle at a set speed. This feature is
called the “auto cruise”. The cruise sequence and dwell time of each preset can be set. It supports
up to 8 cruising tracks, each cruising track with 16 presets.
z
Pattern
Tour
Dome can memorize 160s running path
or 500 programmable instructions. When start pattern tour,
speed dome will move automatically according recorded action path. It supports 4 groups of pattern
tours.
z
Guard
Location
The dome will automatically return to preset position if there is no operation in a period of vacant
time.
z
Default
Action
When you start up the dome camera or do not send commands over a long time, the dome camera
will return to its default functions which include the home place, auto pan, auto cruise and pattern.
z
Dome Address Setup
The dome supports up to 255 addresses and the dome will only response to the instructions given to
its own address.
Please check the ball machine code dialing switch address setting.
z
Manual Object Tracking
The use can move the joystick up, down, left or right to track the appearing object in the screen and
use the joystick to zoom in and out with auto focus.
z
Privacy Mask Protection
Set black mask areas to protect the privacy zones. The black privacy locations can be set, and
support up to 8 mask zones.
z
Timing Running Function
Users can set speed dome operation task at total
6
timing areas during 7 days.
z
Coordinates and Directions Display
User can define the dome’s direction of due north, which will help to show up the exact moving
directions on screen. And zone title is supported to display when the dome moves to the specified
zone.
