High Speed Dome Camera Introduction Manual
31
▌▌
Motion Setup
■
Preset Setup
z
Edit Scene
User can enter this menu to set the scanning function of dome,
like preset,swing,group,auto scan,zones and timing action.
<MOTION SETUP>
→
<PRESET SETUP>
z
Preset Number
[1~255] (Except [95])
If a selected preset is already defined, camera moves to
pre- defined position. If a selected preset is not defined.
"UNDEFINED" shows on monitor.
z
Clear Preset [CANCEL
／
OK]
Delete current Preset data (include edit label)
z
Clear all Preset [CANCEL
／
OK]
Delete all current Preset data (include edit label)
z
Edit Scene
Redefine current Preset scene position Using Joystick move
camera to desired position, By pressing OPEN to save
current PTZ data.
z
Edit Label
Edits Label to show on monitor when preset runs MAX. 10
alphabets are allowed. Enter edit label, “?” cursor will be
displayed on the screen, using left/right of joystick to select
character, and using up/down to move cursor, After
inputting, press “OPEN” key to save and exit the setting.
