High Speed Dome Camera Introduction Manual
36
■
Zones Setup
z
Left And Right Zone Setup
z
Edit Label
<MOTION SETUP>
→
<ZONES SETUP>
The use can set up zone title when the camera moves to a
defined location, which will make it much easier for the user to
identify the location. The dome supports 8 zone titles. Please
check the following steps to set up a zone
z
Zones No. [01~08]
Move the cursor here Move a joystick left or right to choose
the area of the need to set number(1~8)
z
Left Limit
Move the joystick to right and enter into menu
，
press “OPEN” to save
，
press “CLOSE” to exit.
z
Right Limit
Move the joystick to right and enter into menu
，
press “OPEN” to save
，
press “CLOSE” to exit.
z
Edit Label
Edits Label to show on monitor when preset runs MAX. 10
alphabets are allowed. Enter edit label, “?” cursor will be
displayed on the screen, using left/right of joystick to select
character, and using up/down to move cursor, After
inputting, press “OPEN” key to save and exit the setting.
z
Label Display [ON/OFF]
To switch on / off the label display of zone.
z
Clear Zones [CANCEL/OK]
Deletes data in current zone.
