High Speed Dome Camera Introduction Manual
13
z
Pendant-mount Installation Procedures:
*
Notice
: Pendant-bracket is not designed for outdoor installation. If specially required, please do
make sure the waterproof installation of the dome.
1) Take out the bracket from the package (as shown), mark the installation hole positions on the
ceiling referencing to the bottom of bracket.
2) Drill the hole and install 4 pieces of M8 expansion bolt into the hole.
3) Take out the high speed dome and put the cables through the sockets on the bottom of the
pendant bracket. Use M8 screws to fix the bracket and dome body.
4) Use screw nuts with washer to fix the bracket on the wall.
