COP Security 15-CD35F, Installation Manual

Page: 4 / 12

4
Ensure the the rubber grommet is seated
correctly in the base of the dome and around
the cable to help prevent the ingress of dust or
moisture.
A rubber gasket is supplied to be
fi tted between the base of the dome
camera and the mounting surface.
Peel the protective backing off the
gasket then, carefully aligning the
fi xing and cable entry holes, stick
the gasket to the base of the dome.
Feed the power and video
connections through the gasket
and the wall/ceiling then secure the
camera in place using the screws
provided or other suitable hardware.
Grommet
Gasket
Connections - using supplied cable
The camera is provided with a screwed
terminal block or DC Jack on a fl ying
lead for the power supply connections.
If a dc supply is used this must be
regulated.
The camera comes with a fl ying lead for
video out.
The video out lead is terminated into
a male BNC connector allowing the
installer to connect the camera to a
DVR/monitor/mux etc. using a female
BNC-BNC lead.
Ensu
3
A rub
4
The c
5