6
Install the rubber grommet and make a small
hole in the grommet to feed the cable through
Ensure the grommet is seated correctly in the
base of the dome to help prevent the ingress
of dust or moisture.
A rubber gasket is supplied to be
fi tted between the base of the dome
camera and the mounting surface.
Peel the protective backing off the
gasket then, carefully aligning the
fi xing and cable entry holes, stick
the gasket to the base of the dome.
Feed the power and video
connections through the rubber
cable entry grommet.
Secure the camera in place using
the screws provided or other
suitable hardware.
Grommet
Gasket
Carefully unplug the connector of the existing
cable as shown.
Remove the cable and grommet from the
camera.
Unplug
connector
Caref
3
Insta
4
A rub
5
Summary of Contents for 15-CD35F
Page 12: ...12 ...
