36v Hedge Trimmer
10681
Instructions for Use
Please read and retain these instructions for future reference
v001: 07/11/16
-
Cut evenly over this guide line.
Take care to have a secure and safe standing
position when working with your hedge shears in
order to avoid slipping and injury. Always keep the
shearing blades away from your body.
Maintenance (fig. 9 and 10)
Always disconnect the plug from the power socket
before commencing any work on the machine.
Important
: Always clean and oil the blades after
prolonged use of the hedge trimmer. This will
greatly improve the life of the equipment. Damaged
cutting units must be properly repaired
immediately. Clean the shearing
blades with a dry cloth or – in case of heavier dirt –
with a brush. Attention: Danger of injury! Oiling of
the blades should ideally be carried out using an
environmentally friendly lubricant (Fig. 9).
1) Sharpening of the blades:
The blades generally do not need servicing and do
not require sharpening if used correctly. In order to
prevent injuries caused by the blades when not in
use, the sharpened cutting blade should be covered
by the blade cover. The blades cannot be sharpened
by the user without opening the equipment and the
safety mechanism. Sharpening of the blades can
therefore only be carried out at a specialist
workshop.
2) Changing the blades:
Only correct installation of the blades will guarantee
problem-free operation and function of the above
mentioned safety feature of the blades. Changing of
the blades should therefore only be carried out at a
specialist workshop.
3) Blade safety rail (Fig. 10):
The cutting blade set back from the blade housing
reduces the risk of injuries due to unintentional
body contact.
Storing the trimmer after use
The hedge shears must be stored such that there is no danger of injuries being caused by the cutting
blades!
Repair service
Repairs to electric power tools should only be carried out by specialist electrical personnel.
