36v Hedge Trimmer
10681
Instructions for Use
Please read and retain these instructions for future reference
v001: 07/11/16
SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED:
READ ALL INSTRUCTIONS BEFORE USE.
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE CORD, PLUG OR APPLIANCE, IN
WATER OR ANY OTHER LIQUID.
UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING.
DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED CORD OR PLUG OR AFTER THE
APPLIANCE MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE RECOMMEND
THAT THE POWER CORD IS NOT KINKED OR STORED IN A TWISTED MANNER, AND THAT YOU
REGULARLY CHECK ITS CONDITION.
THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF
STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
DO NOT LET CORD HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH HOT
SURFACES.
DO NOT PLACE ON OR NEAR HEAT SOURCES.
DO NOT
COVER THE ITEM IN ANY WAY WHEN IN USE AS THIS MAY CAUSE OVERHEATING.
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS DESIGNED
FOR.
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE
FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE
INTERNAL DAMAGE.
ALWAYS USE AN RCD ADAPTOR.
Dear Customer
These Operating Instructions are intended to help you get acquainted with the machine and use it in
accordance with the regulations. The Operating Instructions contain important information on how
to use the machine safely, correctly and economically. Observing this information will help increase
the reliability and working life of the machine. The Operating Instructions must always be at hand
when the machine is being used. They must be read and observed by every person dealing with the
machine, whether operating, servicing or transporting it addition to the Operating Instructions and
applicable rules for prevention of accidents valid in the country of use and on site.
The specified vibration emission value was measured by a standardised test.
The specified vibration emission value can vary during the actual use of the electric tool, depending
on the way the power tool is used.
-
Note: Take breaks when using the hedge trimmer in order to avoid circulation problems of the
hands caused by pulsations.
-
Try to keep the stress due to vibration as low as possible. For example, ways to reduce vibration
stress include wearing gloves when using the tool and limiting the work time.
-
Always keep hands and feet away from the cutting tools, particularly when switching on the
motor!
-
A tingling feeling or numbness in the hands is a sign of excessive vibration. Limit the operating
time, take sufficiently long work breaks, distribute the work between several people or wear
anti-vibration gloves when using the tool for extended periods.
-
A certain degree of noise from this device is unavoidable. Perform noise-intensive work at times
when this is permitted and at times intended for this type of work. Where applicable, observe
