Stone Effect Fireplace
H790
Instructions for Use
Please read and retain these instructions for future reference
v001: 10/05/21
10/05/21
REMOTE CONTROL: (
Lithium Cell CR2025 3V battery supplied)
This heater includes a remote control. Please follow the following operation instructions to use the
remote control.
ON/OFF
Press ON/OFF button to start the flame effect.
Default interface displays as following:
Two short beeps that increase in pitch sound when switched on and three beeps that decrease in
pitch sound when switched off.
When switches on, the heating level, set temperature and clock icon are displayed. The display will
disappear after 60 second without any operation. Press any button to display again.
⚫
The heating icon will display and start heating when the room
temperature is less than the default setting (10°C). There will be
nothing displayed and no heating if the temperature is the
default setting.
⚫
The clock icon will be flashing because the time is not set yet.
Please follow the steps in
“Time Setting” to set the time.