Stone Effect Fireplace
H790
Instructions for Use
Please read and retain these instructions for future reference
v001: 10/05/21
10/05/21
Low Heating
At default interface, press button MENU twice to display L and flashing heating icon as following:
Press OK button to set temperature. The default temperature is 10°C(50°F). It is displayed as follows:
Press or - to adjust temperature. If the set temperature is higher than the room temperature
detected by appliance, the heating starts. The heating will not start if the set temperature is lower than
the room temperature.
Brightness Control
Brightness Control is to select the desired flame brightness level.
At default interface, keep pressing button MENU to select the Brightness Control, it i
s displayed “bri”
and flashing light bulb icon as following:
Press OK button to start the brightness setting. Press or - to select the brightness level.
5 brightness levels are selectable. Default setting is 3. 5 is the highest level as shown following: