Before You Begin
Menvier40/100
Page 6
i-kp01 Controls and Displays
2
3
4
6
5
8
7
1
1. LCD display (2 x 20 characters).
2. Programming keys.
3. Navigation keys
4. Alert LEDs
5. Setting and unsetting keys.
6. Programmable HUA keys.
7. Number/text keys.
8. Set/Unset LEDs.
Figure 5 Controls and Displays
Opening the ikp-01 Keypad
Note: For EN50131-3:2009, 8.7 the keypad
is a type B ACE, fixed.
To open the keypad first gently prise off the
trim on the front and remove the two
screws. Next, carefully lever the front of the
keypad (containing the PCB and display)
away from the keypad rear housing.
1
2
3
4
Figure 6 Opening the Keypad
2
4
3
3
1
1. Central keyhole.
2. Rear tamper shroud.
3. Cable entry.
4. Fixing holes.
Figure 7 Keypad Rear Housing
1
4
3
4
6
2
5
ABCD-ON
ON
BRIGHT
BACKLIGHT
ET B
A 12V 0 V
1. Sounder.
2. Sounder volume control.
3. Tamper switch.
4. Jumpers for LED function:
5. RS485 termination jumper
6. Connector for control unit (note that the ET
terminals are inactive).
Figure 8 Keypad PCB
Opening Expanders
To open any of the expander cases undo
the single screw, pull the top of the lid
away from the case and then lift out.
Figures 9 and 10 show the interior of the
wired and radio expanders.