manualshive.com logo in svg

Cooper safety CEAG EURO US.1, Mounting And Operating Instructions

Share
Download
Cooper safety CEAG EURO US.1 Mounting And Operating Instructions Download Page 20

Mounting and Operating Manual

Central Battery System EURO ZB.1

20

CEAG Notlichtsysteme GmbH

Modules

 Freely programmable control

with non-volatile program memory for 
progamming and user-specific paramete-
rization purposes. 

Internal log book recording

The ST 20 E control unit saves the log 
book as per DIN VDE 0108 specificati-
ons. 

Control

  On the unit’s front side

The menu-supported control of the ST 20 
E and lighting system takes place via
–  Keyboard and
–  LC display (4 lines, 20 characters 

each, adjustable backlit)

 

  Local switch operation

of a combined general /emergency ligh-
ting system can be provided by means of 
DLS and TLS modules.
 

Configuration

  On the unit‘s front side 

via keyboard and LC display. 
Various user-defined adjustments can be 
made with the aid of menu-based para-
meterization capabilities.

Communication and control

  Printer interface

DB 25 Centronics

 

Storage

 Internal

via a non-volatile memory in the ST 20 E 
control unit.

Connections

  Pluggable screw terminal blocks

provided on the unit enable components 
to be easily installed or removed.

Fig. 13:   
Components of ST 20 E control unit

4-line LC display, 20 

char. each, for mes-

sages and entries 
123456789.123456789.

5.4

  Functions of the ST 20 E Control Unit

Summary of Contents for CEAG EURO US.1













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands