Cooper & Hunter CH-S07FTXK-NG, Owner'S Manual

Page: 13 / 105

Ɣ
3.
Ɣ The drain hose should be bound at the bottom.
1. Put the bound pipes in the wall pipe and then
Ɣ
The wiring board is for reference only, please refer
5. Check if the indoor unit is installed firmly and
upper hook
indoor unit
band
Ɣ
lower hook of
wall-mounting frame
2.
NOTICE
Hang the indoor unit
The power cord and control wire can't be crossed or
winding.
closed to the wall.
3.
indoor
4.
wall pipe
Step 9:
4.
NOTICE
2.
outdoor
3.
sealing gum
4.
5.
gas
pipe
liquid pipe
Step 8:
Bind up pipe
1.
drain hose
indoor and
outdoor power cord
NOTICE
to the actual one.
Do not bend the drain hose too excessively in order
to prevent blocking.
drain hose with the band.
connection pipe
drain hose
band
indoor power cord
Bind up the connection pipe, power cord and
Bind them evenly.
Remove the wire clip; connect the power conn-
ection wire to the wiring terminal according to
the color; tighten the screw and then fix the po-
wer connection wire with wire clip.
The liquid pipe and gas pipe should be bo-
und separately at the end.
Outdoor unit connection
07K, 09K, 12K:
N(1)
blue
2
black
3
brown yellow-
green
Outdoor unit connection
18K . :
N(1)
blue
2
black
3
brown yellow-
green
Put wiring cover back and then tighten the screw.
Close the panel.
Reserve a certain length of drain hose and
power cord for installation when binding th-
em. When binding to a certain degree, sep-
arate the indoor power and then separate
the drain hose.
make them pass through the wall hole.
Hang the indoor unit on the wall-mounting
frame.
Stuff the gap between pipes and wall hole
with sealing gum.
Fix the wall pipe.