background image

P10

6

THIS GO-KART CAN BE HAZARDOUS TO OPERATE if driven carelessly.

INJURIES can result if you do not follow these Instructions:

●READ OWNER’S MANUAL NAD ALL LABELS BEFORE YOU OPERATE THIS 

GO-KART.

●NEVER  OPERATE  THIS  GO-KART  WITHOUT  PROPER  INSTRUCTIONS. 

Beginners require mature supervision.

●NEVER OPERATE THIS GO-KART ON PUBLIC ROADS It is intended off-road 

use only.

●NEVER OPERATE THIS GO-KART AT EXCESSIVE SPEEDS.

●NEVER ATTEMPT WHEELIES,JUMPS,OR OTHER STUNTS.

●NEVER USE WITH DRUGS OR ALCOHOL.

●ALWAYS USE AN APPROVED HELME AND PROTECTIVE GEAR.

7

●Operation of this Go Kart by children under the age of 16 lncrease of the 

risk of severe injury or death.

●An adult supervision required always.

●Never permit children UNDER AGE 16 to operate this Go Kart

●Overloading can adversely affect vehicle handling

●Operator use only. Passengers prohibited.

●This vehicle is designed and manufactured for OFF-ROAD use only.

●Driving on public streels. Roads or highiays is illegal.

●Always wear helmet and other protective equipment.

●Do not operate this vehicie after consuming Alcohol or Drugs.

●Gasoline  is  flammable.  When  refueling.  Pls  shut  off-engine.  to  avoid 

sparks and   open flame.

●Read  owner’s  maual  carefully  before  riding.Keep  owner’s  manual  with 

vehcle.

8

●Moving parts can crush and cut. 

●Keep hands clear. 

●Do not operate with guard removed.

9

Transform the gear whatever you want to enter that when a gear, must 

return to the “N”position of the files to get into the you want in gear.

P11

Go Kart RECOGNITION

1

VIN plate number and product VIN (

See left picture)

2

Engine model and serial number (

See right picture)

1

2

1

The ignition switch

CONTROL FUNTIONS

Location 

                        Functions                       Key state

All circuits wre disconnected       Pull out

Circuit was connected 

(brake light could work)

Not pull out

2

Killer switch

W

hen  you  press  killer  switch

,

  engine would 

stop 

 

3

Headlight switch

L

oca

ti

on

F

unc

ti

on

 

 

Open front lamp

Summary of Contents for challenger gk-6125

























Reviews: