Coolster challenger gk-6125 Owner'S Manual Download Page 5

P6

19. When drive to the hillside, always use properly according to 

correct  procedures  required  in  instructions.  Avoid  over-smooth  or 

soft  terrain,  in  accordance  with  the  rules  mentioned  in  manuals. 

Center of gravity to the high side. With the slope driving, do not spin 

until master turning skills on flat roads described in the manuals.

20. During climbing, if want to turn off or reverse, pay attention to 

use the correct method. When climbing, avoid the engine stall, use 

correct gear and maintain a stable speed. If you want to turn off or 

reverse, do as the brake programs required in the manuals. Get off 

from the higher side. Start and get on the vehicle according to the 

instructions.

21. When driving in unfamiliar areas, pay attention to obstacles. 

Do not try to climb over large obstacles, such as large rocks or fallen 

trees.  When  over  obstacles,drive  carefully  according  to  the 

instructions.

22. Be  careful  when  slide  or  brake.  Learn  to  control  braking  or 

sliding  safely    when  on  flat  roads  in  low  speed,  such  as  ice 

surface,keeping  in  slow  speed,carefully  driving,to  prevent  loss  of 

control

23. Do not drive in riptide or deep water. It is hard to brake when 

the plate is wet. Check the brake devices when away form water. Try 

to brake several times as much as possible.

24. When reverse, please ensure that no one or obstacles, behind, 

slow reverse.

25. Using  the  specified  type  and  size  of  the  tires  in  the 

instructions,  maintain  the  proper  tire  pressure  specified  in  the 

operation manuals 

26. Do  not  reassemble  the  vehicle  by  increasing  inappropriate 

equipment or using accessories.

27. Do not overload.

28. Do not touch the vent pipe, it’s too hot after driving.

GUIDELINES ON SAFE DRIVING

WARNING

You  could  be  KILLED  or  SERIOUSLY  INJURED  if  do  not  follow 

instruction.

1, when approaching corners or bends to reduce speed. Upon the 

completion of turn, may gradually increase the speed. 

2, when crossing the vehicles parked in front of, to be very careful. 

Because the driver of the vehicle may be invisible to you and the door 
opened, the forward block in your way. 

3, Brake Lining may Motorcycle rinsing wetting lose their role, so 

when cleaning End after walking ago, should check all brake system.

4,Please put dry the oil inside carburetor and the oil tank before 

transportation,in order to avoid jamming. 

5,Transit goods please vertical put,to avoid engine oil leak.
For training please call ASI at 1-800-887-2887

DANGER

NOTICE

CAUTION

WARNING

NOTICE is used to address practices not related to 

personal injury.

DANGER indicates a hazardous situation which,if not 

avoided,will result in death or serious injury.

WARNING  indicates  a  hazardous  situation  which,  if 

not avoided, could result in death or serious injury.

CAUTION,  uesd  with  the  safety  alert  symbol, 

indicates  a  hazardous    situation  which,  if  not 

avoided,could result in minor or moderate injury.

P7

Summary of Contents for challenger gk-6125

























Reviews: