background image

PAY ATTENTENTION TO YOUR SAFETY

Go Kart is not a toy, driving may cause danger. The operation of 

ATV is different from other motorcycles

automobiles and so on 

vehicles.  If  don’t  adopt  right  counter  measures,  even  in  right 

usage(such as turning

mountain roads

obstacles),can be easily 

rollover or collision.

Please  drive  according  to  the  operation  rules,  or  will  bring 

serious damage or death:

1.  Read  carefully  the  instruction  and  all  the  labels,drive 

according to the procedure

2.  Contact with the local agency, search the training courses 

nearby, carry on training. Don’t drive until right guidance.

3.  Children below 16 years old can not drive this 

Go Kart

, for 

this Go Kart

 is not for children below 16 years old.

4.  Can not carry people
5.  Do  not  drive  on  paved  roads,  including  sidewalk

lane

packing and street

6.  Do  not  drive  on  public  streets

roads

highway(even 

made of sand and stone)

7.  When  driving,  please  wear  suitable  certificated  helmet

eye  protection  device(goggle  or  face  cover)

gloves

boots

long-sleeved shirt and long sleeve pants

8.  Do not drink wine or take medicine before or in driving
9.  Do  not  speeding.  To  the  allowing  scope  of  the  terrain, 

visibility,operational experience, drive in uniform speed.

10. Do  not  use  this  vehicle  for  the  balance  of  technology, 

jumping and other stunts.

P4

11. Check 

Go Kart

 before using every time, make sure it is in 

safe  sitation,operate  the  inspection

maintenance method and 

time table in the instructions

12. When driving ,do not put one hand away with handle bar or 

one leg away with seat

13. Slow  down  and  pay  more  attention  when  driving  in 

unfamiliar terrain. Pay attention to the changes of terrain.

14. Do not drive on bumpy, wet, soft places, unless they have 

mastered driving skills and put into practice in such places, always 
alert in such terrain.

15. When turning, operate according to the relevant knowledge 

in  manuals.  Try  to  high-speed  turns,  be  sure  to  carry  turning 
training in the low-speed. Do not speed when turning.

16. Do not drive in the slope which is too steep, exceeding the 

Go Kart

 and your allowed skills .First train in the flat slope before 

trying to drive in more steep slope 

17. In climbing, always use in proper procedures according to 

the  requirements  in  instructions  .  Carefully  observe  the  terrain 
before climbing ,carefully climb in slippery or soft terrain. Driving 
on  the  way,  keep  the  body  center  of  gravity  forward,  do  not 
suddenly  full-throttle  or  shift.  Do  not  speed  when  climbing  the 
peak.

18. When brake in declivity  and ramp, always use according to 

correct  procedures  required  in  instruction  .Carefully  observe 
terrain before downhill, keep center of gravity backwards. Do not 
high-speed downhill. Avoid turning when downhill (may 

Go Kart 

lead to a sharp tilt to one side), walk straight as much as possible.

P5

Summary of Contents for challenger gk-6125

























Reviews: