P32
P33
CLEANING
1, in order to keep the car clean and protect the surface
appearance of the painting, electroplating, should regularly
or irregularly its cleansing. When cleaning, use of external
surface water irrigation, rush soil. Use a soft cloth or sponge
dip cleaning liquid bubble gently cleans the outer surface, to
avoid residual gravel surface and paint scratches
electroplating layer. Finally reuse water for irrigation.
2, attention:
● washing, to avoid using the high-pressure water erosion
under parts:
(1) ignition switch;
(2) multi-purpose switch;
(3) Below cushion;
(4) The exhaust pipe muffler exports;
(5) air filter inlet
After the car wash thoroughly dry, and then start engine,
running for a few minutes. Finally repeatedly braking
performance brake inspection and adjustment until braking
performance standards so far.
Special Note: in the hot engine, the first will not wash.
Engine room temperature with the same question again
when cleaning. If water pressure caused the brake, the
former damping seals and electrical parts Loss
