background image

P34

P35

STORAGE

If the park does not need to use a long time, in order to 

maintain  a  good  state  of  the  car,  you  please  address  the 

following methods: 

1), select the right parking place. The location should have 

security, 

ventilation, 

moisture-proof, 

anti-freezing 

conditions. 

2), for engine lubricants. 

3) in the fuel tank and the carburetor fuel release all net, 

oil  stored  properly.  Note:  Do  not  overlook  the  release 

carburetor  net  residual  oil.  Otherwise,  no  need  for  a  long 

time, the surface of the plastic fuel carburetor of holes to 

plug, re-use of the car when trouble. 

Warning:  volatile  fuel  in  the  fuel  emissions,  the  engine 

must be stopped operating in the ventilation good place to 

prohibit smoking ban on the use of open flame and sparks 

objects. 

4) In order to prevent cylinder rust, we should adopt the 

following measures: 

Remove spark plugs, A Spoonful (15 ~ 20 m) from the clean 

engine oil into the cylinder spark plug hole with a piece of 

cloth  spark  plug  holes  starter  motors,  mobile  number  to 

Detroit from top to bottom so that the oil in the cylinder wall 

are  cloth.  Finally,  the  spark  plugs  and  spark  plug  cap 

installed. 

5)  Battery  demolition  down,  stored  in  antifreeze, 

sunscreen,  and  other  items  collision  difficult  places.  Every 

two weeks an additional charge. 

6) wash and dry your car, paint waxing to all, to all chrome 

painted on the surface antirust oil. 

7)  to  inflatable  tires,  tire  pressure  up  to  the  required 

standard  air  pressure.  After  stopping  the  car  will  be  good, 
with  shelves  or  pieces  of  wood  and  other  wheels  will  be 
boosted so that the wheel does not contact with the ground. 

8) will cover the car to prevent the dust down. Do not use 

plastic sheeting to things such as gas-tight coverage, as there 
are for the mechanical vapor corrosion.

1. Vehicles should be solidly fixed on the transporters, there 

should  be  effective  rain  preventing  measures,  without  bumps 
and damaged phenomenon happen.

2. The packing carton shall not be tilted on the way of delivery.

AFTER THE RE-USE STORAGE

Transport 

1)  Remove  the  guards  cover  the  car,  clean  the  body.  If 

placed more than four months, the need for replacement of 
engine oil. 

2), the battery will be sufficient to re-installed on board. 
3) add fuel to the fuel tank. 
4) all of the pre-inspection lane. 
5) before traveling during the next regular session, a choice 

open,  pedestrian  areas  for  less  performance  inspection, 
confirmed Properties normal traffic could resume normal.

Summary of Contents for challenger gk-6125

























Reviews: