Cool Compact AHKMN Series, Translation Of The Operating Instructions

Page: 22 / 52

22
6.2 Double door models
Open the door at 90

.
Unscrew the screw at the
underside of the panel.
Fold the panel upward and
secure it against fall down.
Remove the screws at the upper
right hinge. Lift the door out. Remove the screws at the middle hinge.
Remove the hinge. Lift-out the lower door.
Remove the screws at the lower right hinge.
Remove the hinge.
Screw the lower left hinge tight. Change heating
bridge profile from right to left and remove the
plug from the rivet nut in the middle left. Turn the
right upper door about 180

and insert it on the
left below. Fix the middle hinge. Turn the lower
right door about 180° and insert it on the left
above. Fix the upper left hinge.
Attention!
Transpose the
mating contact for
door switch device.
Break out the break-out for the hinge in
the panel on the left. Close the panel
and screw it tight.