Cool Compact AHKMN Series, Translation Of The Operating Instructions

Page: 16 / 52

16
Temperature control:
The desired temperature can be set over the electronic controller (see picture 2
electronic controller). In case none of these buttons are pressed, the digital
display shows the current value (room temperature).
When pushing button “SET” the rated value is displayed and you may check if the
right temperature is set.
If you now wish t
o adjust the rated value, push button “SET” first, than set the
desired value by button “UP” or “DOWN”. This rated value is adjustable within the
factory given limits only.
In case of power failure or as the case may be device switch off, the pre-set
values are kept.
Picture 2: Electronic controller
LED LED LED LED Button Button down+ Button
alarm evaporator compressor ECO SET Horn off Info
fan
LED Button Button up + Button
Defrost ECO manual defrost ON/OFF
Overview of buttons and operation of electronic controller
To switch device on/off, press button for approx. 2 seconds.
Pressing this button leads to menu „INFO“, button „SET“ gives
access to ask for the following information.