Cool Compact AHKMN Series, Translation Of The Operating Instructions

Page: 15 / 52

15
2.2 Initial operation
The unit should be cleaned before starting the operation. See chapter 5
„cleaning
and maintenance“. Put in accessories like supports, racks etc. according to the
required height. Make sure before connection that electrical current and voltage
are in accordance with the specifications on the nameplate. You will find the
nameplate behind the panel of the installation compartment, on the right sidewall.
(see picture 4, page 20)
Initial operation/Connection of refrigerators with built-in cooling:
The connection has to be done over a correctly installed sealed contact socket.
We recommend a connection to a separate circuit (fuse 10A).
Initial operation/Connection of refrigerators to remote cooling:
The connection has to be done over a correctly installed sealed contact socket.
We recommend a connection to a separate circuit (fuse 10A). All other
connections like condensate drain, refrigeration lines and control leads (on
solenoid valve provided by the customer) have to be done by local
refrigeration/electric specialist.
3. OPERATION
3.1 Electronic controller
You will find the control elements in the front at the panel of the installation
compartment.
Picture 1
Switch on:
Press on/off switch of the electronic controller for approx. 2 sec.
1. Electronic controller
2. Lighting over door
switch device in the
panel
3. Lock
4. On/Off switch
1. 2. 3. 4.