Cool Compact 1200, Instruction Manual

Page: 21 / 60

20
7.1 DOOR STOP CHANGE FOR SINGLE DOORS
Open the door at 90 . Fold the panel upward and Remove the screws at the
Unscrew the screw at secure it against fall down. lower right hinge. Remove
the underside of the Remove the screws at the the hinge.
panel. upper right hinge. Lift the
door out.
Screw the lower left hinge tight. Turn Break out the break-out for the hinge in
the door about 180 and insert it. the panel on the left. Close the panel
Secure the door and fix the upper left and screw it tight.
hinge.
21
7.2 Double door models
Open the door at 90 . Fold the panel upward and Remove the screws at the middle
Unscrew the screw at secure it against fall down. hinge. Remove the hinge. Lift-out
the underside of the Remove the screws at the the lower door. Remove the screws
panel. upper right hinge. Lift the at the lower right hinge. Remove
door out. the hinge.
Screw the lower left hinge tight. Change heating
Bridge profile from right to left and remove the
Plug from the rivet nut in the middle left. Turn the Break out the break-out for the hinge in
Right upper door about 180 and insert it on the the panel on the left. Close the panel
left below. Fix the middle hinge. Turn the lower and screw it tight.
right door about 180 and insert it on the left
above. Fix the upper left hinge.
ATTENTION!
Transpose the
mating contact for
door switch
device.