ISSUE-1 2/8/2017
14
Using the sear/ saute function
1.
Use utensils suitable for non stick pans when using this item.
2.
Wash the removable bowl and lid before first use and dry
thoroughly.
3.
Place the pressure cooker on a stable, flat, heat resistant surface
and away from surfaces that may be damaged by steam.
4.
Unwind the cable and plug in to the pressure cooker housing and
then plug into the mains supply. The display will illuminate. For
safety do not allow the cable to dangle over the edge of units.
5.
Remove the lid and descending series of notes will be heard.
6.
Press the SEAR button and the cook indicator above the start
button will flash.
7.
Press the start button and the default cooking time of 30
minutes (0:30) will be shown in the display, the cook indicator
will stop flashing and sear function will start to operate. Allow
the bowl to heat and sauté food as you would normally. DO NOT
fit the lid and please note the length of the cooking time cannot
be adjusted.
8.
When cooking is complete, press the cancel button to switch off
the sear function.
Summary of Contents for MY-CS6007WP
Page 6: ...ISSUE 1 2 8 2017 6 Control Panel...
Page 24: ...ISSUE 1 2 8 2017 24...
