background image

 

5

 

 

 

B422785 - 191031 

 

Caution!! 

 

Always place the appliance on a horizontal, level, and stable 
surface. 

 

This appliance is intended for normal household use only. 

 

Always unplug the appliance after use. 

 

SAVE THESE INSTRUCTIONS 

HOUSEHOLD USE ONLY 

POLARIZED PLUG INSTRUCTIONS 

This appliance is equipped with a polarized plug (one blade is wider 
than the other). To reduce the risk of electric shock, this plug will fit into 
the polarized outlet only one way. If the plug does not properly fit into 
the outlet at first, reverse it. If it still does not fit, contact a competent 
qualified electrician. 

Do not attempt to modify the plug in any way

SHORT CORD INSTRUCTIONS 

A short power supply cord is provided to reduce the hazards resulting 
from becoming entangled in or tripping over a longer cord. Extension 
cords may be used if care is exercised in their use. 

 

The electrical rating of the extension cord should be at least that of 
the appliance. If the electrical rating of the extension cord is too 
low, it could overheat and burn. 

 

The resulting extended cord should be arranged so that it will not 
drape over the countertop or tabletop where it can be pulled on by 
children or tripped over. 

 

 

Summary of Contents for B422785-00003-00000





















Reviews: