19
B422785 - 191031
TROUBLESHOOTING
PROBLEM
EASY SOLUTION
Machine does not
work
* There is a safety interlock switch on the processing
bowl / blender. Make sure bowl and lock are
securely locked into position.
* If the motor still wo
n’t start, check the power cord
and power outlet.
French Fry and
Julienne Disks
* Always clear any blocked potato from the disc
before processing more potatoes.
Some food remains
on the disc after
processing
* It is normal for small pieces to remain after
processing. Simply remove the food remains and
rinse the disc under water.
Motor slows down
when mixing dough
* Amount of dough may exceed maximum
capacity. Remove half and process in two
batches.
* Do not add more than 9 oz dough.
Dough is too dry
* Run machine and add water through feed cube,
1 tablespoon at a time until dough mixes inside of
the processing bowl.
Dough is too wet
* Run machine and add flour through feed cube, 1
tablespoon at a time until dough is able to mix in
the processing bowl.
Motor slows down
when using the
chopping blade
* Amount of meat or food may be too much.
Remove half and process in two batches.
* If chopping meat, trim the meat of fat before
processing.
Vibrates/moves
during processing
* Clean and dry the rubber feet at the bottom of
the unit.
* Also make sure that the maximum load
capacity is not being exceeded.
