background image

 

4

 

 

 

B422785 - 191031 

customer service telephone number for information on 
examination, repair, or adjustment.  

15.

 

The use of attachments not recommended or sold by the 
manufacturer may cause fire, electric shock or injury. 

16.

 

Do not use outdoors. 

17.

 

Do not let cord hang over edge of table or counter. 

18.

 

Only use the appliance for its intended domestic use, the 
manufacture will not accept any liability if the appliance is subject 
to improper use or failure to comply with these instructions. 

19.

 

Check that the voltage rating of the appliance does in fact match 
that of your electrical system. 
Any connection error will nullify the warranty. 

20.

 

The appliance must be plugged into an earthed electrical socket. 

21.

 

If you have to use an electrical extension lead, it must be earthed, 
and you should make sure that no-one can trip over it. 

22.

 

Do not allow the power cord to hang within the reach of children, 
come close to or into contact with the hot parts of your appliance, 
any other source of heat or sharp edge. 

23.

 

Switch off the appliance and disconnect it from supply before 
changing accessories or approaching parts which move during 
use.  

24.

 

The appliance is designed for the preparation of small quantities of 
food, which have to be consumed rather quickly. It is not designed 
for the preparation of large quantities at once.  

25.

 

Keep hands and utensils out of container while operating to reduce 
the risk of severe personal injury and/or damage to the appliance. 
A rubber spatula may be used but must be used only when the 
appliance is not running. 

26.

 

To reduce the risk of injury, never place the cutting unit blades on 
base without the bowl properly installed.  

27.

 

Always operate the appliance with lid in place, except for the fruit 
juicer attachment 

28.

 

Always close the bowl with the lid before starting the operation. 

29.

 

Install blades properly and cautiously. Injury can result if moving 
blades accidentally become exposed. 

30.

 

To disconnect cord, turn the speed selector to "0”, then remove the 

plug from wall outlet. 

31.

 

Avoid contacting moving parts. 

32.

 

Do not blend hot liquids. 

Summary of Contents for B422785-00003-00000





















Reviews: