Product
Support Guide
water
witch
Electronic Water Leveller
02
COMPLIANCE NOTICES
Page 1 of 4
Australian Certification Services Pty Ltd ABN 37 121 022 366
PO Box 627 Jannali, NSW 2226 AUSTRALIA
Phone:+61 2 8521 0726
Email:[email protected]
www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 4004
Issue Date: 15
th
May 2019
Issue: 01 Revision: 00
Certificate of Conformity
Australian Certification Services Pty Ltd grants to the WaterMark Approved User:
Nymet Australia Pty Ltd
Trading as Nymet Australia Pty Ltd
the right to use the WaterMark as shown above in conjunction with the Certificate No. on product/s as identified in the
WaterMark Schedule and as listed on the WaterMark database
www.abcb.gov.au/Product-Certification/WaterMark-
Certification-Scheme
which have been shown to comply with the
appropriate Applicable Specification
referred to below
and as amended from time to time
. The WaterMark User is granted a licence to use the WaterMark subject to the rules
governing the use of the WaterMark.
Product Type:
Solenoid Valve
Product Use:
Water Supply
Brand:
NYMET
Certification Specification/s: WMTS 030:2016 Solenoid valves
Issue Date
15
th
May 2019
Paul Greig
Initial Issue Date:
12
th
December 2005
(GlobalMark)
General Manager
Expiry Date:
2
nd
July 2023
Certificate No.: 4004
This Certificate is issued by a JAS-ANZ accredited certification body. The ABCB and JAS-ANZ do not in any way warrant,
guarantee or represent that the product the subject of this Certificate conforms to the WaterMark Certification Scheme Rules, nor
accepts any liability arising out of the use of the product. The ABCB disclaims to the extent permitted by law, all liability (including
negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this
Certificate. The WaterMark Certification Scheme is a conformity assessment scheme based on ISO/IEC 17067. This Certificate may
only be reproduced in its entirety
Page 1 of 2
Australian Certification Services Pty Ltd ABN 37 121 022 366
PO Box 627 Jannali, NSW 2226 AUSTRALIA
Phone:+61 2 8521 0726
Email:[email protected]
www.certificationservices.com.au
www.jas-anz.org/register
Certificate Number: 40070
Issue Date: 3
rd
July 2018
Issue: 02 Revision: 00
Certificate of Conformity
Australian Certification Services Pty Ltd grants to the WaterMark Approved User:
Nymet Australia Pty Ltd
Trading as Nymet Australia Pty Ltd
the right to use the WaterMark as shown above in conjunction with the Certificate No. on product/s as identified in the
WaterMark Schedule and as listed on the WaterMark database
www.abcb.gov.au/Product-Certification/WaterMark-
Certification-Scheme
which have been shown to comply with the
appropriate Applicable Specification
referred to below
and as amended from time to time
. The WaterMark User is granted a licence to use the WaterMark subject to the rules
governing the use of the WaterMark.
Product Type:
Back Flow Prevention Devices
Product Use:
Water Supply
Brand:
NYMET
Certification Specification/s: AS/NZS 2845.1:2010 Water supply—Backflow prevention devices Part 1:
Materials, design and performance requirements
Issue Date
3
rd
July 2018
Paul Greig
Initial Issue Date:
27
th
March 2017
General Manager
Expiry Date:
2
nd
July 2023
Certificate No.: 40070
This Certificate is issued by a JAS-ANZ accredited certification body. The ABCB and JAS-ANZ do not in any way warrant,
guarantee or represent that the product the subject of this Certificate conforms to the WaterMark Certification Scheme Rules, nor
accepts any liability arising out of the use of the product. The ABCB disclaims to the extent permitted by law, all liability (including
negligence) for claims of losses, expenses, damages and costs arising as a result of the use of the product(s) referred to in this
Certificate. The WaterMark Certification Scheme is a conformity assessment scheme based on ISO/IEC 17067. This Certificate may
only be reproduced in its entirety
SOLENOID VALVE
BACKFLOW PREVENTION VALVE
