Product
Support Guide
water
witch
Electronic Water Leveller
15
MANUAL FILL
Manual Fill Mode is used to add water to a pool or project for a set period of time or until
the water level reaches the sensor height.
SET MANUAL FILL
• Press
MODE
three times until you reach the
SET MANUAL
function.
• Press
↑
or
↓
to set the required fill time
(Adjust by 10min increments to a maximum of 48 hours).
• Press
ENTER
to confirm fill time and begin countdown timer.
• When the fill process is complete, press
MODE
to return to
AUTOMATIC
mode.
The water level must be low for this function to operate correctly. Take care to correctly
estimate the required fill time and ensure the sensor is free of debris to prevent potential
water damage onsite.
OPERATING MODES
The Water Witch Smart Sense includes six operating modes to ensure there is an option to
suit your particular pool, spa or water project.
The following process is used to set the correct TANK TYPE and TANK VOLUME.
SET OPERATING MODE
• Press
MODE
twice to enter the
SET TANK TYPE
screen
• The current tank type option will flash
• Press
↑
or
↓
key to select the most appropriate mode for your project
• Press
ENTER
to accept the correct operating mode
• Press
↑
or
↓
key to adjust the volume of water for your project
• Press
ENTER
to accept the correct water volume
