Product
Support Guide
water
witch
Electronic Water Leveller
13
If you do not press
ENTER
to confirm the sensor level the unit will remain in
SET LEVEL MODE.
After being left in this mode for 30 munites the unit will trigger a fault and stop
operating.
SET SENSOR LEVEL
• Fill the pool or water
body to the required
water level
• Turn on power and
water supply to Water
Witch.
• Press
MODE
until you
reach the
SET LEVEL
function.
• Confirm Sensor height is
correct by checking the
SCAN / FILL
operation
when lifting the Sensor
up and down.
• Press
ENTER
to confirm.
When the water level is at
the fill line the SCAN icon
will be displayed.
When the water level is
below the fill line the FILL
icon will be displayed.
START-UP PROCESS
I
t’s now time to start your Water Witch. Complete the following process to test your unit
and confirm all components are operating correctly:
