Manual CC 5451 IR
20
•
The TITLE will appear in the top left corner.
•
Select the position where the TITLE is to be displayed by using
the 4 directional buttons, and then press the SETUP button.
Move the cursor to ‘POS’ and press SET button.
6) Select 'END' and press the SETUP button to complete TITLE input.
¾
DAY/NIGHT
-
COLOUR
: IR - Cut Filter is in position for colour mode.
-
B/W
: IR - Cut Filter is mechanically removed for B/W mode.
- AUTO
: In AUTO mode the external light levels determine whether the camera is in
COLOR or B/W mode, it switches after a stabilisation period of 3~4sec.
Note
When Day/Night mode is set to Auto, under conditions where there are strong
IR lights periodically flickering, the IR-Cut filter could malfunction.
SYNC:
Two synchronisation modes are available, INTERNAL and EXTERNAL LINE-
LOCK. In LINE-LOCK mode, it synchronises the video signal between cameras without a
synchronous generator. The line-lock synchronisation is only used in areas of 60Hz
(NTSC Models) / 50Hz (PAL Models).
- INT: Internal synchronisation
- LL: External line-lock synchronisation
• If ‘LL’ is selected, it can be adjusted to the desired phase.
Press the SET button.
• Adjust to the desired phase from 0 to 359.
