Manual CC 5451 IR
9
Installation
1. Bracket & Camera Mounting
- Affix the bracket to the mounting surface.
- Use the supplied screws to attach to the mounting surface using the pre-drilled holes in the
bracket.
2. Power Connect & Monitor Impedance
- Use a DC12V/1A regulated PSU or AC24V 1A.
- To avoid fire or shock hazard, always use a CE marked PSU.
- Set the monitor impedance switch to 75
Ω
. Check the impedance switch if the screen is
blurred.
3. Sun-shield Mounting
- Slide the Sun-Shield over the camera.
4. Remote control & VBS EXTRA
- Remove the cap and connect the connector of the remote control andVBS EXTRA to the
cable socket.
