background image

Manual CC 5451 IR 

17

 
 

™

 

OFF: 

There is no reduction in noise level. 

™

 

LOW:

 There is a small reduction in noise level with almost no ghost image. 

™

 

MIDDLE:

 The most effective mode. There is a sufficient reduction in noise levels 

without causing significant ghosting. 

™

 

HIGH: 

The level of noise is reduced greatly, however there is an increase in ghosting.

  

 
Note

 

When AGC is turned off, DNR does not operate. 
 
 

SENS UP (Low illuminance) 

 
SENS UP helps maintain a bright, clear screen image by automatically detecting changes in 
the level of light in low light level conditions.

  

 

1. Position the arrow to point to 'SENS UP' on the SETUP menu by using the UP and DOWN 
buttons. 
2. Select the value required by pressing the LEFT or RIGHT button. 
 

 

AUTO

: Low light level automatic mode. 

 

OFF

: The function does not operate.

  

 

 

Note

 

When SHUTTER is in the manual or flk mode, SENS UP does not operate. 
When AGC is turned off, SENS UP does not operate.  
 

 
 
 
 
 
 
 
 
 
 
 
 

3. Press the SETUP button when all the settings are complete.

  

Summary of Contents for CC-5451 IR

























Reviews: