Manual CC 5308
9
Installation
1. Dome Base Mounting
- Open the dome cover by loosening 3 screws using special wrench provided.
- Mount the base of camera to a sturdy surface using 4 screws (1.5 inch) and 4 premade holes
on the base of the dome.
2. Power Connect & Monitor Impedance
- DC12V/300mA regulated power supply (DC12V only) AC24V Class 2 power supply
(AC24V/DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply
.
- Set the monitor impedance switch to 75
Ω
. Check the impedance switch if the screen is blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction and angle of camera.
- Make sure to retighten the screws for camera bracket.
- Set any function you wish to activate by using the OSD buttons.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten 3 screws.
