18
Configuration Menus
(1)
Input Configuration
Analog 1 Function –(Default None)
Digital Input 1 Setup - Pre Set to Auto Start
(2)
Output Configuration
Relay Output 1 Setup Pre Set to Pre Alarm
Relay Output 2 Setup - Pre Set to Run Signal
Relay Output 3 Setup Pre Set to Alarm
Relay Output 4 Setup - Pre Set to Crank Signal
(3)
Throttle Configuration
Throttle Type - Throttle Type (Default = Off)
TSC Mode Selection
TSC Min Speed Selection
TSC Max Speed Selection
TSC Ramp Rate Selection
Throttle Curve Selection
Multistate Speed 1 Selection
Multistate Speed 2 Selection
Multistate Speed 3 Selection
Multistate Speed 4 Selection
(4)
Engine Safety Configuration
Sender Check Bypass Time Period Selection
Fuel Level Check On/Off Selection
Low Fuel Level Pre Alarm % Selection
Low Fuel Level Alarm % Selection
Fuel Level Alarm Delay Time Selection
Oil Pressure Check On/Off Selection
Low Oil Pressure Pre Alarm % Selection
Low Oil Pressure Alarm % Selection
Oil Pressure Alarm Time Delay Selection
Engine Temperature Check On/Off
Engine Temperature Pre Alarm Selection
Engine Temperature Alarm Selection
Engine Temperature Alarm Time Delay Selection
Battery Volt Check On/Off
Low Battery Volt Pre Alarm Selection
High Battery Volt Pre Alarm Selection
Battery Volt Trim Setting
Over speed Alarm On/Off
Over speed Alarm RPM Setting
Over speed Alarm Time Delay Selection
