www.ControlloCasa.it
+39 06 94804820
In case the USBy configuration requires an alignment of the communication channel
with your Router/Modem, the following graphic interface will be displayed.
At this point, press OK to close the window; reconnect to the network created by USBy
(e.g. USBy-V3_XXXXXX) and press the ACTIVATE button again.
After about 20 seconds, if the data entry was correct, you will see the following
graphic interface
Please, take note of the returned USBy ID (example is given in red on the screen
above)
as it will be required during the next USBy activation phase (section 2.1.2).
Note-3: Once USBy is connected to your WIFi Network, the network created by USBy
will no longer be present in the list of WiFi Networks displayed by your PC/Mac.
At this point, you only need to activate the use of USBy on our website
www.controllocasa.it
in order to receive the alerts (section 2.1.2).
XXXXXXXXXXXX