Radio Controlled Multiplug
4 individually controlled sockets
CAUTION: Please check that the appliances which you wish to plug
into the Multiplug support regular disconnection of main supply.
Energenie is a trading name of Sandal plc, Claremont House, Deans
Court, Bicester, UK, OX26 6BW
Setting up
1. Insert the supplied CR2032 battery into the Hand Controller
2. Insert the plug into a mains wall socket and switch the wall socket on. The red
indicator light near the ON-OFF button should flash at 1 second intervals indicating it is
ready to learn a key code from the hand controller.
If the
light is not flashing, ensure the Multiplug is off, then press and hold the green
button on the front of the Multiplug for 6 seconds or so until it starts to flash at 1 second
intervals.
3. Press
and hold briefly any one of the on buttons on the hand controller. The red
indicator light on the Multiplug will flash quickly and then turn off. Pairing of the
Multiplug to the hand controller is now complete.
4. Simply plug the appliances you want to control into the Multiplug and you can use the
hand controller button pairs to control the corresponding sockets on the unit.
Using the hand controller to switch the sockets
• Use
the remote controller numbered button pairs to switch the required
socket ON or OFF
• Use the ALL button pair to switch all sockets ON or OFF at the same time.
Using the green button on the Multiplug to switch the
sockets
• Press the green ON-OFF button on the Multiplug to turn all sockets ON or OFF.
Add a new hand controller
Put the Multiplug into learning mode again as indicated in the Setting up procedure and
follow the same procedure for the new hand controller.
NOTE: The Mulitplug is compatible with the MiHome Gateway, which allows remote
switching and timer settings from the Energenie MiHome smart phone app.
Factory Reset
The device
memory can be erased by factory reset:
1. Turn
the Multiplug OFF (keeping power available at the main socket).
2. Press and hold the green button on the extension lead for 6 seconds. Note: The LED
will flash slowly after the first 3 seconds, and then briefly quicken after 6 seconds, before
returning to a slow flash rate, which indicates factory reset is complete.
V6 - May 2019
d
ua
l c
on
t
rol
le
r o
pt
io
n
General:
Product Code: ENER010
Radio Frequency: 433.92Mhz
Range: approx. 25 metres in open area
Applications: Domestic appliances with a
standard UK plug. Indoor use only
Remote controller:
4 separate ch all ON or OFF
Battery: replaceable 3V CR2032
Transmission indicator lamp: red=ON
Transmitter output: -7.70 dBm (0.169mW)
Multiplug:
Rating: 240V~ 50Hz, 13A, 3kW max.
Power consumption in standby: < 0.5W
Mains cable length: 1.8 Meter
Number of sockets: 4
Multiplug ON-OFF button:
• Single press to toggle power ON or OFF
• Press and hold for 3 seconds: learning
mode (slow flash)
• Press and hold for 6 seconds: factory
reset
•
SRD receiver classification: Class 3 (Non
Critical)
Dual Controller Option
The extension lead can be controlled by
two remote controllers. Additional remote
controllers can be purchased through our
website.
When an attempt is made to link a third
controller with a socket, it will
automatically overwrite the memory of the
first controller.
*
*
• Radio controlled Multiplug
with controller for use with domestic
appliances.
•
Conveniently switch off appliances to reduce Standby usage and
save money.
• The remote
control does not require direct line-of-sight to
operate.
It can work even when the socket is hidden behind
furniture or in an adjacent room.
• Individual 4
channel remote control with all ON or OFF buttons.
• Dual controller option.
• Works with the MiHome Gateway* for control via the Energenie
MiHome app.
• 13 Amp
rated sockets to BS5733, indoor use only (Max 3000W
for whole Multiplug).
*MiHome
Gateway available to purchase separately.
