X-320M™ User's Manual
Operation
Section 3: Operation
X-320M™ can be operated using a web browser, or by sending text commands to an XML status/control
page. X-320M™ also allows you to control the outputs using inputs, or alarms.
Note: Using an input or alarm to control the outputs was described throughout previous sections of the
manual, and will not be described here.
3.1 Browser Operation
Once X-320M™ is set up, users can access the
Status Page
using a web browser by typing the IP
address of X-320M™ into the web browser address bar. For example, using the default IP address, the
user would enter
http://192.168.1.2
. If the IP address is changed from the default, the user must
use the new IP address. Note that if any port is used other than the default port 80, the port must also be
included in the request. For example, accessing the unit at port 8000 would be as follows:
http://192.168.1.2:8000
.
The following screen appears when the
Status Page
is selected:
Xytronix Research & Design, Inc.
Page 87
Summary of Contents for X-320m
Page 1: ......
