X-320M™ User's Manual
Appendix H: Weather Service Data Publishing/Upload
Weather Underground Setup
There are four steps to configuring data publishing to the Weather Underground system.
1 – Obtain an ID number from Weather Underground by clicking on the 'here' link and following the
instructions on the registration form that appears.
2- Enter the ID number obtained from step one into the ID Number field of the Weather Underground
setup page and enable data publishing. Weather Underground also requires a password. This password
is the same password used to login to the Weather Underground account created in step one. The
Server and Port number fields can generally be left at their default values. For a list of other possible
servers visit the Weather Underground Upload Protocol website at
http://wiki.wunderground.com/index.php/PWS_-_Upload_Protocol. (At the time of writing this manual,
there is only one.) Submit the settings before moving on to step three.
3 – Once data publishing has been enabled and the data publishing settings have been submitted to the
device, a test packet can be sent to Weather Underground. Press the Test button to send a test packet
now.
Xytronix Research & Design, Inc.
Page 125
Summary of Contents for X-320m
Page 1: ......
