Installation and Setup
X-320M™ User's Manual
Output 1 or Output 2 (This option will only appear if one of the Digital I/O's is selected as an
output in the I/O tab)
This field is used to set the action that the corresponding Output will have due to an alarm condition.
The first drop-down box specifies the action. The following actions are available:
-
No Action:
No action is taken by the output.
-
Turn On:
Turns the output On due to an alarm condition. The output will turn Off when
alarm conditions are no longer met
The second drop-down box specifies the conditions that will cause the action previously specified.
The following conditions are available:
-
High Alarm:
The specified output action occurs due to the High Alarm.
-
Low Alarm:
The specified output action occurs due to the Low Alarm.
-
High or Low Alarm:
The specified output action occurs due to the High and/or Low Alarm.
Remote Relay 1-2
X-320M™ can be configured to control relays in other ControlByWeb™ products that are located at
a remote location on the network. The same actions for the local outputs also apply to remotely
controlled relays. This field determines the action taken by Remote Relay due to an alarm condition.
The following actions are available:
-
No Action:
No action is taken by the relay.
-
Turn On:
Turns the relay On due to an alarm condition. The relay will turn Off when alarm
conditions are no longer met.
The second drop-down box specifies the conditions that will causes the action previously specified.
The following conditions are available:
-
High Alarm:
The specified relay action occurs due to the High Alarm.
-
Low Alarm:
The specified relay action occurs due to the Low Alarm.
-
High Alarm or Low Alarm:
The specified relay action occurs due to the High or Low Alarm.
Remote Services
This field specifies the action with a remote server due to an alarm condition. The following actions
are available:
-
No Action
: No action is taken.
-
Send Message
: state.xml will be sent to the remote server.
The second drop-down box specifies the conditions that will cause an alarm trigger. The following
alarm conditions are available:
-
High Alarm
: The specified action occurs due to the High Alarm.
-
Low Alarm
: The specified action occurs due to the Low Alarm.
-
High Alarm or Low Alarm
: The specified action occurs due to the High and/or Low Alarm.
Page 74
Xytronix Research & Design, Inc.
Summary of Contents for X-320m
Page 1: ......
