X-320M™ User's Manual
Installation and Setup
Email Option
Simple email messages can be sent in response to alarm conditions. This parameter is used to
specify what alarm conditions, if any, will cause email messages to be sent. Email notification will
work only if email is correctly set up in the
Network
setup page.
-
No Email Messages
:
No email messages will be sent due to alarm conditions.
-
Send Email on High Alarm
: Email notifications will be sent due to the High Alarm condition.
Use Email Address
If email messages are to be sent based on alarm conditions, these check boxes specify to which
email addresses the message will be sent. Email addresses specified on the
Network
setup tab will
be shown next to each check box.
Output 1 or Output 2 (This option will only appear if one of the Digital I/O's is selected as an
output on the I/O tab)
This field is used to set the action that the corresponding Output will have due to an alarm condition.
The first drop down box specifies the action. The following Actions are available:
-
No Action:
No action is taken by the output.
-
Turn On:
Turns the output On due to an alarm condition. The output will turn Off when
alarm conditions are no longer met.
The second drop-down box specifies the conditions that will cause the action previously specified.
The following conditions are available:
-
High Alarm:
The specified output action occurs due to High Alarm.
Remote Relay 1-2
X-320M™ can be configured to control relays in other ControlByWeb™ products that are located at
a remote location on the network. This field determines the action taken by Remote Relay due to an
alarm condition. The following actions are available:
-
No Action:
No action is taken by the relay.
-
Turn On:
Turns the relay On due to an alarm condition. The relay will turn Off when alarm
conditions are no longer met.
The second drop-down box specifies the conditions that will cause the action previously specified.
The following conditions are available:
-
High Alarm:
The specified relay action occurs due to the High Alarm.
Remote Services
This field specifies the action with a remote server due to an alarm condition. The following actions
are available:
-
No Action
: No action is taken.
-
Send Message
: state.xml will be sent to the remote server.
The second drop-down box specifies the conditions that will cause an alarm trigger. The following
conditions are available:
-
High Alarm
: The specified action occurs due to the High Alarm.
Xytronix Research & Design, Inc.
Page 65
Summary of Contents for X-320m
Page 1: ......